Residential Telephones

A traditional landline telephone system, also known as "plain old telephone service" (POTS), commonly handles both signaling and audio information on the same twisted pair of insulated wires: the telephone line. Although originally designed for voice communication, the system has been adapted for data communication such as Telex, Fax and Internet communication. The signaling equipment consists of a bell, beeper, light or other device to alert the user to incoming calls, and number buttons or a rotary dial to enter a telephone number for outgoing calls. A twisted pair line is preferred as it is more effective at rejecting electromagnetic interference (EMI) and crosstalk than an untwisted pair.
The telephone consists of an alerting device, usually a ringer, that remains connected to the phone line whenever the phone is "on hook", and other components which are connected when the phone is "off hook". These include a transmitter (microphone), a receiver (speaker) and other circuits for dialing, filtering, and amplification. A calling party wishing to speak to another party will pick up the telephone's handset, thus operating a button switch or "switchhook", which puts the telephone into an active (off hook) state by connecting the transmitter (microphone), receiver (speaker) and related audio components to the line. This circuitry has a low resistance (less than 300 Ohms) which causes DC current (48 volts, nominal) from the telephone exchange to flow through the line. The exchange detects this DC current, attaches a digit receiver circuit to the line, and sends a dial tone to indicate readiness. On a modern push-button telephone, the calling party then presses the number buttons in a sequence corresponding to the telephone number of the called party. The buttons are connected to a tone generator circuit that produces DTMF tones which end up at a circuit at the exchange. A rotary dial telephone employs pulse dialing, sending electrical pulses corresponding to the telephone number to the exchange. (Most exchanges are still equipped to handle pulse dialing.) Provided the called party's line is not already active or "busy", the exchange sends an intermittent ringing signal (about 90 volts AC in North America and UK and 60 volts in Germany) to alert the called party to an incoming call. If the called party's line is active, the exchange sends a busy signal to the calling party. However, if the called party's line is active but has call waiting installed, the exchange sends an intermittent audible tone to the called party to indicate an incoming call.
The phone's ringer is connected to the line through a capacitor, a device which blocks the flow of DC current but permits AC current. This constitutes a mechanism whereby the phone draws no current when it is on hook, but exchange circuitry can send an AC voltage down the line to activate the ringer for an incoming call. When a landline phone is inactive or "on hook", the circuitry at the telephone exchange detects the absence of DC current flow and therefore "knows" that the phone is on hook with only the alerting device electrically connected to the line. When a party initiates a call to this line, and the ringing signal is transmitted. When the called party picks up the handset, they actuate a double-circuit switchhook which simultaneously disconnects the alerting device and connects the audio circuitry to the line. This, in turn, draws DC current through the line, confirming that the called phone is now active. The exchange circuitry turns off the ring signal, and both phones are now active and connected through the exchange. The parties may now converse as long as both phones remain off hook. When a party "hangs up", placing the handset back on the cradle or hook, DC current ceases to flow in that line, signaling the exchange to disconnect the call.
Our product line features quality items from such manufacturers, such as, Ameriphone, Krown, Ultratec and Clearsounds. Many of the amplified phones come with large buttons and easy to read numbers. The Ameriphone line has portable printers and large visual displays for use with TDD and TTY products. We also carry listening devices, alarm clocks that vibrate, as well as silent call pagers, receivers for carbon monoxide / smoke detectors and weather alert systems. All of the brands we sell are high-quality and dependable, so you can be confident of the product you buy from us. Calls to parties beyond the local exchange are carried over "trunk" lines which establish connections between exchanges. In modern telephone networks, fiber-optic cable and digital technology are often employed in such connections. Satellite technology may be used for communication over very long distances.
In most telephones, the transmitter and receiver (microphone and speaker) are located in the handset, although in a speakerphone these components may be located in the base or in a separate enclosure. Powered by the line, the transmitter produces an electric current whose voltage varies in response to the sound waves arriving at its diaphragm. The resulting current is transmitted along the telephone line to the local exchange then on to the other phone (via the local exchange or a larger network), where it passes through the coil of the receiver. The varying voltage in the coil produces a corresponding movement of the receiver's diaphragm, reproducing the sound waves present at the transmitter.
A Lineman's handset is a telephone designed for testing the telephone network, and may be attached directly to aerial lines and other infrastructure components.

Gigaset Communications

Gigaset Communications, formerly known as Siemens Home and Office Communication Devices is a multinational corporation based in Munich, Germany. Its main business is in home electronics, including corded and cordless phones, voice over ip (VoIP) phones.

High Definition Sound Performance

High Definition Sound Performance (HDSP) enables with an even higher sound quality than HSP, although "normal" land-line phone users cannot distinguish the sound difference, since this is a service available only to VoIP customers with G.722 codec. [citation needed] Also, phones require a broadband connection and are limited to the company's VoIP phones such as the A580IP. HDSP technology uses the G.722 wideband audio (or HD audio) codec which provides high definition sound.